Part Number Hot Search : 
03953 NTE2375 PL9120 D5050J 0B121 9S12G CONTROLS 2SD728
Product Description
Full Text Search
 

To Download ISO-F2-P1-O1 Datasheet File

  If you can't view the Datasheet, Please click here to try to view without PDF Reader .  
 
 


  Datasheet File OCR Text:
  yuan iso em series isolation transmitter iso series frequency signal to vo ltage/current signal transmitter iso f/v series general characteristic: accuracy grade:0.2/0.5 extremely high linearity in whole process(nonlinearity<0.1%) three-port isolation:2500vdc power supply/input/ouput power supply:5vdc/12vdc/24vdc etc. input frequency signal:0-1khz/0-5khz/0-10khz output voltage: 0-2.5v/0-5v/0-10v or current signal: 0-10ma/0-20ma/4-20ma it can supply input superior draw power:5vdc/10ma low cost,small size,sip 12 anti- fire ul94v-0 package industrial temperature range: -20~+85 ceramic base,smd applications sine wave,square wave,sawtooth wave etc. signal isolated amplifier and converter transducer(fa) frequency signal data acquisition generator,electromotor etc. cirumgyrate systems inspect equipment and sensor signal acquisition non-electricitymete signal transfer specification: sunyuan iso series frequency signal isolated trans mitter is a mixed ic that frequency signal convert to standard signal pro rata. it is made of multiway high isolated dc/dc converters and a high speed frequency signal isolation and transmitter,suitable to any frequency signal isolated transform.its isolated power not only provide power supply to internal tran sform,but also supply a isolated dc current to input port.it can meet industrial level for the extremely poor temp erature,hunidity and s haking conditions. it is very easy to use,only a few external components are required. part number and description: din 1x1 iso- f - p - u(a) input signal accessorial power supply output rated voltage or current f1:0-5khz p1:dc24v o1:4-20ma f2:0-5khz p2:dc12v o2:0-20ma f3:0-10khz p3:dc5v o4:0-5v f4:user-defined p4:dc15v o5:0-10v p5:user-defined o6:1-5v o7: user-defined shenzhen sunyuan technology co.,ltd.
yuan iso em series isolation transmitter continue isolation voltage value 2500vdc power vin range: 10%vin jointing temperature(10sec.) +300 if over above range,maybe cause products dama ged permanently. figure 1 technic parameter: parameter test condition mix type max unit isolated voltage ac,50h z,1m 1000 2500 v(rms) frequency 0 1000 20000 hz input signal voltage 2.5 5 vp-p voltage 5k 1 khz/v g. a d j current 5k 1/4 khz/ma g.adj temperature drift 100 ppm/ non-linearity 0.1 %fsr input maladjusted voltage 5 7 mv output signal 5 10 v load capability vout=10v 1 k ? signal output ripple no-filter 5 7 mv signal voltage temperature drift 25 v/ reference voltage source iout<50ma 5 v voltage user-defined 3.3 12 24 vdc assistant power current vd=24v 50 ma power output ripple no-filter 10 mv operating temperature -20 85 storage temperature -40 125 application examples figure 2 figure 3 figure 4 figure 5 shenzhen sunyuan technology co.,ltd.
yuan iso em series isolation transmitter example 1:(refer to figure 2) figure 2:test low voltage frequency signal,voltage output stype input:0~10khz/3~10vac frequency signal,outpu t:0~5vdc isolated signal.don?t make ?zero? adjustment.w1=5k(multiturn potentiometer),adjust w1,make 10khz corresponding to 5v output. example 2:(refer to figure 3) figure 3: test low voltage frequency signal,current output stype input: 0~10khz/3~10vac frequency signal,output:0~20madc isolated signal. don?t make ?zero? adjustment. w1=5k(multiturn potentiometer),adjust w1,make 10khz corresponding to 20madc output.refer to figure 5. example 3:(refer to figure 4) figure 4: test high voltage frequency signal,current output stype input:0~10khz frequency breadth value >10v ,output:4~20madc isolated signal.w2=10~20k potentiometer,adjust w1,make 10khz corresponding to 20madc. example 4:(refer to figure 5) figure 5:test open collector input frequency signal,output voltage input:0~10khzc frequency signal,output:0~5vdc is olated signal.don?t need ?zero?adjustment. w1=5k(multiturn potentiometer),adjust w1,m ake 10khz corresponding to 5v output. pin function: output ground gnd2 output g.adj 5k power ?+? power ?-? output ?zero? 10k vout ?+? output ground gnd2 iout ?+? iout ?-? pin ?+? input ground gnd1 frequency input w1 w1 vd gnd w2 vout gnd2 iout+ iout- vref gnd1 i n + 1 2 6 7 10 11 12 13 14 15 16 22 21 24 23 shenzhen sunyuan technology co.,ltd.
yuan iso em series isolation transmitter pcb reference size(standard dip 24pin) shenzhen sunyuan technology co.,ltd. e-mail:info@szsunyuan.com skype:candyatsunyuan msn:sun-yuan03@hotmail.com shenzhen sunyuan technology co.,ltd.


▲Up To Search▲   

 
Price & Availability of ISO-F2-P1-O1

All Rights Reserved © IC-ON-LINE 2003 - 2022  

[Add Bookmark] [Contact Us] [Link exchange] [Privacy policy]
Mirror Sites :  [www.datasheet.hk]   [www.maxim4u.com]  [www.ic-on-line.cn] [www.ic-on-line.com] [www.ic-on-line.net] [www.alldatasheet.com.cn] [www.gdcy.com]  [www.gdcy.net]


 . . . . .
  We use cookies to deliver the best possible web experience and assist with our advertising efforts. By continuing to use this site, you consent to the use of cookies. For more information on cookies, please take a look at our Privacy Policy. X